Technical specifications
Bore Size : | Diameter 65mm to 300 mm (1 1/2″ ~ 12″) |
Flow Rate : | 0.36m3/min ~ 165.00m3/min (12.5 ~ 5,700.00 CFM) |
Static Pressure : | 1000- 10000 mmAq |
Axial Power Consumption : | 0.5 -300 KW |
EV series 3-lobe roots compressors
EVV series 3-lobe roots vacuum pump
EV series 3-lobe roots compressors are researched and developed on a basis of RSS series. The biggest feature of this compressor is high rotation speed (the maximum can be 4000RPM), high capacity. With the breakthrough of technology and the modification of practical application, EV series compressors have higher efficiency, higher pressure, lower weight and other features. The inlet sizes are from 2.5”to 12”. The pressure of single compressor can be 1 Kgf/cm2
Bore Size : | Diameter 65mm to 300 mm (1 1/2″ ~ 12″) |
Flow Rate : | 0.36m3/min ~ 165.00m3/min (12.5 ~ 5,700.00 CFM) |
Static Pressure : | 1000- 10000 mmAq |
Axial Power Consumption : | 0.5 -300 KW |
Compressor Working Principle
Roots compressor is a cubage compressor, discharge airflow scale to the compressor’s speed. Every rotation, there is two lobes to finish three times absorbing and discharging air, compared with two lobes compressor, the air is more smooth, smaller load change, higher strength, lower noise and vibration.
Two parallel shafts have three lobes each, all the lobes keep small clearance with each and housing inside. Every lobes rotation, a certain air will be absorbed at inlet and transferred form the housing inside surface to compressor’s discharge port.
Two shafts will be turned by the timing gears, no any touching between lobes, so it can be turned at high speed without any lubrication inside. It has the following characteristics: simply configuration, running smoothly, and good performance stabilization. It has been applied for many fields.